Key takeaways
- A licence application is a filing about works, a source, a point of diversion, a volume and the land the water serves. Aerial capture is good at four of those five and says nothing about the hydrology.
- The volume problem is the whole technical story. Photogrammetry stops at the water surface, so the defensible way to establish a dugout or reservoir capacity from the air is to capture it dry or at low water, or to pair the aerial surface above water with a method that measures below it.
- A full pond gives you surface area at a date and nothing about depth. An empty or drawn down pond gives you the stage storage relationship that an application actually wants.
- The works as built are frequently not the works as drawn. An intake, a berm, a pipeline route or an outlet installed years ago is often best documented by flying it.
- The served area is straightforward from the air and is often the weakest part of an older file: what land the water actually goes to, how much of it there is, and what is on it.
- Timing is substantive rather than logistical. Spring high water and late summer low water tell different stories about the same structure, and both dates belong on the record.
- HEADS UP: a licence application is a regulatory filing. Yield, allocation and hydrology assessments and the design of works need the appropriate professional, and anything about the legal boundary needs an Alberta Land Surveyor. The capture is evidence inside someone else's process.
Water files in Alberta have a particular character. The works are often older than the records. The dugout was pushed in by somebody's father, the intake was moved twice, the pipeline route is remembered rather than drawn, and the volume in the file is a number that was estimated once and never checked. Then there is a reason to formalise it: a licence application, a renewal, an amendment, a diversion for a new use, a transfer as part of a land deal, or a question from the regulator.
At that point somebody has to describe the works and the volumes accurately. Aerial capture is a good tool for part of that and a useless tool for other parts, and the difference is sharper here than on most applications because of one physical fact: a camera cannot see through water.
What the filing is actually asking for
Stripped of the paperwork, an application for a licence or an amendment turns on a handful of factual questions:
- Where is the water coming from, and where exactly is the point of diversion.
- What are the works, where are they, and what are their dimensions and capacity.
- How much water is being taken or stored, and on what basis is that number calculated.
- What land and what use is the water serving.
- What are the effects, and what is the condition of the source and the surrounding land.
Aerial capture supports the location, the works, the storage geometry and the served area. It does not supply the hydrology, the yield assessment, the allocation analysis or the effects conclusion. Those are professional judgements, and no amount of imagery substitutes for them.
The water surface problem
This is the part worth understanding before commissioning anything, because it decides whether the deliverable is usable.
A photogrammetric survey reconstructs surfaces from what the camera sees. Water returns a reflection of the sky, or a glare highlight, or an image of whatever is floating on it. The bottom is not in the data at any depth. So:
- A full dugout or reservoir, flown as is, yields the surface extent of the water at that moment and the geometry of the banks above the waterline. Capacity cannot be derived from that, only guessed at from the shape of the visible banks.
- A dry or drawn down structure yields the actual bowl. With control, that produces a stage storage curve: the volume held at each water level, which is the thing an application wants and the thing a regulator can check.
- A partly drawn down structure yields the part above the waterline, which can be joined to a measurement of the submerged part obtained another way, with the join at a water level recorded at the time of capture.
The practical consequence is scheduling. If a defensible capacity number is needed, the capture belongs in the window when the structure is at its lowest, which in much of Alberta means late summer or early autumn, or during a planned clean out when it is empty and there is an excavator on site anyway. A clean out is the best opportunity most operations will ever get to document a structure properly, and it is almost always missed because nobody thinks of the survey until the paperwork starts.
The works as they were actually built
The second place a capture earns its cost is documenting physical works that were never properly drawn. On water files this recurs constantly:
- The point of diversion. Where the intake physically sits, its position in a stated coordinate system, its relationship to the bank and the channel, and what is around it.
- Berms, dams and embankments. Crest elevation, crest width, slope geometry, and the elevation of the spill point or emergency overflow, which is the number that decides how much can be stored before water leaves in an uncontrolled way. The same measurements that matter on a containment pond or tailings structure.
- Freeboard at a stated date. The distance from the water surface to the spill point, which is a condition observation rather than a design value and is commonly asked about.
- Conveyance. The route of a pipeline, canal or ditch from the source to the use, its length, and the land and crossings it passes through.
- Outlets and returns. Where water leaves and what it discharges onto.
- Pumping and metering infrastructure. Present, located and photographed as it exists, which is frequently the only record there is.
The served area
The easiest part and often the weakest part of an older file. What land is the water going to, how much of it is there, and what is happening on it. An orthomosaic with a stated coordinate system makes the served area a measured polygon rather than a remembered figure, and shows the irrigated extent, the pivot or wheel line coverage, the yard, the pens or whatever the use actually is. On an amendment where the use has changed since the original licence, that is the substance of the change.
It is also a place to be careful. The area the water serves and the area inside a legal parcel boundary are different things, and a drone cannot determine the second one. Any statement about where the boundary is comes from an Alberta Land Surveyor.
Timing is part of the evidence
Water files are seasonal in a way that most survey work is not. The same structure captured at three different times supports three different statements:
- Spring high water. The maximum extent, where water reaches, what gets inundated, and how much freeboard was left at the worst moment of the year.
- Late summer low water. The bowl geometry, the capacity, the condition of the banks and the works, and the state of the source in a dry period.
- Empty, during a clean out or construction. The complete structure, which is the one capture that makes every later volume question answerable.
Because of this, the recommendation on a water file is more often a short series than a single visit, flown in the same frame each time so the captures are comparable. The cadence question applies here with the seasons setting the dates.
Making it defensible
A capture that is going into a regulatory file needs to survive someone else checking it. The requirements are the ordinary ones for imagery used as evidence, applied here:
- A stated date and time for every capture, with the water level recorded at the time if water is present.
- A stated horizontal and vertical frame, including the geoid model, so elevations can be compared with other data in the file instead of only with themselves.
- Ground control and independent checkpoints, with the accuracy tested and reported rather than asserted.
- A short methodology record: aircraft, sensor, altitude, ground sample distance, control, software and expected accuracy.
- Unedited originals retained alongside any annotated figure, because the annotated figure is the exhibit and the originals are the proof.
- Plain statements of what the survey did not measure, specifically anything below the water surface and anything about the legal boundary.
What still needs somebody else
Worth being blunt about, because applications get delayed when a survey is mistaken for an assessment:
- Hydrology and yield. Whether a source can sustain a diversion, what the natural flow or recharge is, what the effects on other users are. Specialist work, every time.
- Design and dam safety. Sizing, stability, spillway capacity and anything touching dam safety requirements needs a professional engineer. A measured crest elevation is an input to that and not a substitute for it.
- Wetland and environmental assessment. Whether a feature is a wetland and what its value is comes from a qualified assessment.
- The legal and title side. Boundaries, descriptions, rights of way and registrable plans are the work of an Alberta Land Surveyor.
- The application itself. Prepared and submitted by the applicant or their consultant to the regulator. We produce a dated, controlled, documented record of physical reality to go in it.
If there is a dugout, reservoir, intake or diversion that has to be described accurately in a filing, the cheapest useful conversation is about when it will be at its lowest. Tell us the structure and the deadline and we will say which parts of the number can come from the air and which cannot. The agriculture and municipal pages cover the two settings this comes up in most.
